Strong Strut Security Equipment Mounting Bars
with Stainless Worm Gear Clamps

This type is Perfect for Mounting Equipment Enclosures, Cabinets or devices to Round Poles or Pipes – Indoors or Outdoors

Normally used in pairs on larger Enclosures or Devices, so if that is your intended use, don’t forget to order a pair.

These Security Equipment Mounting Bars with the Stainless Worm Gear Type Clamps on them, will allow you to mount almost anything to a large pipe or Pole. The Stainless Clamps come in two sizes: Regular and XL.

     The Regular will fit a pipe or pole from 4” to 8” in diameter.
     The XL will fit poles or pipes 4″ to 12″ in diameter.
     The XL allows for mounting to our SteadyMax at any height on the pole.

All types of our versatile Mounting Bars are the same length, no matter the attachment type. The small size Mounting Bars are on an 8” long section of Strong Strut, and the Large size Mounting Bars are on a section of Strong Strut that is 16” long.

You can mount almost any Enclosure, Cabinet, Device, Power Supply cabinet, Speaker or any other device using these Mounting Bars.  If the device, cabinet or enclosure is small enough, you may only need one Mounting Bar. However, most enclosures and cabinets will need to for stability.

The weight limits when mounting something to this type of Mounting Bar (with the Stainless Clamps), is 20 pounds.  When used in pairs, the limit is 40 pounds total.

Choose between White and Black rubber end covers.