Stand-Alone Mounts & Systems

Providing a sturdy, stylish device installation system is our top priority here at Strong Poles. Not all installation can be done with a poles system; we have developed the Stand-Alone Mounts and Systems for those places. All pieces can be used by themselves or mix them for a unique way to mount your devices like cameras, motion detectors, or Led lighting. 

2 Ft Arm with Dome Camera Mount

 This combo simply takes our 2 Ft. arm and our dome or panoramic camera mount.

This arm takes your Cameras and attachments out to 2 feet from the Pole. It can be added to any 4″ Square Pole or any SteadyMax Pole with a Pedestal Mount.

It can be used “stand-alone” as a Wall-Mounted Accessory as well (no pole at all). The Flourish scroll is optional and dresses up this mount when used indoor or outdoor.

It will support any dome or panoramic camera that can be mounted on the 6″ disc.  

Dome Mount for Fly-Out/Fly-Over

Strong Poles has introduced a new Dome Camera Mount designed to screw onto our stylish “Fly-Over or Fly-Out Camera Mounts.” This round mount can accommodate virtually any Dome camera on the market. The 6″ round mounting plate has a 1″ diameter hole to pass through.

This mount simply screws onto our Fly-Over or Fly-Out Camera Mount or to any 1-1/2″ NPT pipe threaded pendant mount.

All of our Strong Poles and accessories are constructed with aluminum so that rust and corrosion will never be a problem in the field.

Panoramic Camera Mount

Strong Poles has introduced a new Panoramic Camera Mount designed to screw onto our stylish “Fly-Over Camera Mount.” This square mount can accommodate virtually any Panoramic camera on the market. The 7″ square mounting door swings out on the bottom to make wiring and installation quick and straightforward.

This mount simply screws onto our Fly-Over Camera Mount or to any 1-1/2″ NPT pipe threaded pendant mount and then can be locked into place with the two set screws in the neck.

Then you can drop the swing-down door by removing the aluminum thumb screws. This will allow you to drill any access and/or bolt holes in the aluminum door to match the brand and style of camera you have. The recessed area also hides any wiring or connections inside the mount. The result is a sleek, clean mount of your panoramic camera.

The door is hinged with stainless steel hinges and fastened with stainless screws.

All of our Strong Poles and accessories are constructed with aluminum so that rust and corrosion will never be a problem in the field.

Parapet PTZ Camera Mount

This Parapet Mount is not only functional by itself, but it can also be ordered with a variety of attachments that we make for it. (see pictures and choose your options via the “pull-down” above).

This sturdy Parapet mount attaches to a Parapet Wall with anchors, then can be rotated back around for Service.

This handy mount was initially meant to hang only PTZ Domes, but we keep introducing all kinds of new attachments for it. Keep watching as we make this great mount more and more valuable.

Twin Adapter and Extension

The Twin Adapter and the Extension are two new products that can give you more versatility and capability. They can be used together or separately to provide you with the perfect vantage point.

The Extension is used to give you an extra 16-18″ in length, solely designed for the Parapet Mount, and can attach an additional PTZ or any other device that uses our 1-1/2″ NPT fitting.

The Twin Adapter makes it possible to mount two PTZ’s or other devices that use our 1-1/2″ NPT fitting. The Twin Adapter is exceptionally versatile and can be used as additions to several of our other mounts. (EX: Fly-Out, Reacher, etc.).

The Twin Adapter is available in both White and Dark Bronze/Black, and the Extension is only available in White.

Camera Mounts with Built-in Junction Box

Strong Poles has designed an ever-growing series of innovative new Camera Mounts that not only gives you three different faces for camera mounting (Front face is 4’W x 7″H – Sides are 6’W x 6″H) and also gives you a handy junction box enclosure (4″ x 4″ square 7″ Deep) for wiring, POE injectors, lightning resistors, etc. Our lineup now includes a Corner Mount and a Wall Mounted version.

The caps on the top and bottom of the junction box portion can also be easily drilled for holding conduit connectors or liquid-tight connectors. These all-aluminum camera mounts can be easily drilled anywhere for access holes, mounting screws, or conduit fittings.

Cameras, lighting, sensors, or other devices can easily and quickly be mounted on any or all of the three mounting faces. The combinations go much farther than what we show you here in pictures. Use your imagination and mount what you need for your project.

Wall Mount Bracket

Strong Poles wall mount brackets for 4″ Square Poles.

Strong Poles has introduced a Wall Mount Bracket set that allows users to mount any Strong Poles brand 4″ Square 5′, 8′ & 12′ poles to a wall or parapet (with at least a 24″ minimum distance between the upper and lower bracket mounts). This new bracket set is a lower-cost alternative to a dedicated wall-mount design and allows a user to convert a Strong Pole to a wall mount design in only a few minutes. This Pole Bracket set comes with bolts for attaching to a Strong Pole but does not include any bolts or anchors for attaching to your wall.

Surface Mount Pole and Plate

Strong Poles has designed an innovative new Surface Mounting System that uses short poles to help you mount cameras or accessories.

This mount can be mounted upside down under building eaves, sideways from building faces, or even bridges to provide multiple fronts for mounting cameras, sensors, or antennas.

One everyday use is on a flat roof coupled with a Fly-Out Mount to hang a PTZ camera (or two) over a parapet wall. This mounting system can be used with any of the Strong Pole attachments to create a truly custom mounting system for any purpose. 

This system’s two standard pole heights are 15″ and 30″ tall (not counting the 1/4″ thick aluminum base). The base measures 8″ x 8″ square and has 1/2″ holes for anchors, lag bolts, or other mounting hardware (not provided). Also, a 3″ opening allows conduit, cables, fiber optic, etc., to pass through the base.

The cap on the top of the short pole may be removed for mounting an attachment or accessed for using the pole as a junction box. Holes for conduit fittings may be drilled anywhere needed quickly.

Cameras, lighting, sensors, or other devices can easily and quickly be mounted on any or all of the four mounting faces or any mount used. The combinations go much farther than what we show you here in pictures. Use your imagination and mount what you need for your project.

About Us and Contact Information

StronPoles is a Texas-based company in the business of manufacturing and providing Security Camera Poles that are the most rigid poles in the world. We also manufacture a full line of products for mounting electrical devices or other stylish and sturdy devices for inside or outside projects.

Using Strong Poles solves a whole host of problems with using existing light poles and hose clamps for your security cameras, sensors, and detectors. Whether wired or wireless, Strong Poles provide a purpose-built solution to your security installations. For more information on the stand-alone mounts and systems, contact one of our Sales Engineers toll-free at 844-669-3537.