Strong Strut Mounting Bars

With Beam Clamps

This type is Perfect for Mounting Speakers, Boards or almost anything else – to most Beams – Indoors or Outdoors

Normally used in pairs on larger Speakers or longer Boards, Metal or Plastics, so if that is your intended use, don’t forget to order a pair.

  These Mounting Bars with the Beam  Clamps on them, will allow you to mount almost anything to Beam inside or outside of a building. (the small Beam Clamps will fit a Beam up to 5” wide, and the large size Mounting Bars fit Beams that are 10″ wide).

All types of our versatile Mounting Bars are the same length, no matter the attachment type. The small size Mounting Bars are on an 8” long section of Strong Strut, and the Large size Mounting Bars are on a section of Strong Strut that is 16” long.

 You can mount almost any Enclosure, Cabinet, Device, Power Supply cabinet, Speaker or any other device using these Mounting Bars.  If the device, cabinet or enclosure is small enough, you may only need one Mounting Bar. However, most enclosures and cabinets will need to for stability. Many end users mount boards or plywood to these to give them a platform for mounting other types of devices.  The only limit is your imagination.  Let us know how you used these Mounting Bars.

  The weight limits when mounting something to this type of Mounting Bar (with the Beam Clamps), the small size is limited to 50 pounds each, or 100 pounds total, and the large size Beam Clamps are limited to 100 pounds each, or 200 pounds total when used in pairs.

These Beam Clamp types do not have any Rubber End Covers..

Strong Strut Mounting Bars

Stainless Worm Gear Type Clamps

This type is Perfect for Mounting Equipment Enclosures, Cabinets

or devices to Round Poles or Pipes – Indoors or Outdoors

Normally used in pairs on larger Enclosures or Devices, so if that is your intended use, don’t forget to order a pair.

  These Mounting Bars with the Stainless Worm Gear Type Clamps on them, will allow you to mount almost anything to a large pipe or Pole. ((the Stainless Clamps will fit a pipe or pole from 4” in diameter to 8” in diameter).

All types of our versatile Mounting Bars are the same length, no matter the attachment type. The small size Mounting Bars are on an 8” long section of Strong Strut, and the Large size Mounting Bars are on a section of Strong Strut that is 16” long.

 You can mount almost any Enclosure, Cabinet, Device, Power Supply cabinet, Speaker or any other device using these Mounting Bars.  If the device, cabinet or enclosure is small enough, you may only need one Mounting Bar. However, most enclosures and cabinets will need to for stability.

  The weight limits when mounting something to this type of Mounting Bar (with the Stainless Clamps), is 20 pounds.  When used in pairs, the limit is 40 pounds total.

Choose between White and Black rubber end covers.

Strong Strut Mounting Bars

With Pipe Clamp Attachment

This type is Perfect for Mounting Speakers, Boards or almost anything else – by attaching the Mounting Bar to any Pipe or Conduit between – Indoors or Outdoors

  These Mounting Bars with the pope clamp attachment are perfect when you need to suspend something at a certain height. They are available in single Strong Strut sections and Double Strong Strut Sections.

All types of our versatile Mounting Bars are the same length, no matter the attachment type. The small size Mounting Bars are on an 8” long section of Strong Strut, and the Large size Mounting Bars are on a section of Strong Strut that is 16” long.

 You can mount almost anything to these Mounting Bars, such as Speakers, Wood for using them to attach and electrically isolate something, or any other device or enclosure..  If the device, cabinet, wood section or enclosure is small enough, you may only need one Mounting Bar. However, some wider pieces or bigger enclosures may need two Strut Sections for stability. Many end users mount boards or plywood to these to give them a platform for mounting other types of devices.  The only limit is your imagination.  Let us know how you used these Mounting Bars.

  The weight limits when mounting something to this type of Mounting Bar (with the Pipe Clamp attachment), the small size single is limited to 50 pounds, or 100 pounds total if using the two Strut Section model.  The large size single can hold 100 pounds, or 200 pounds total when using the two Strut Model.

NOTE ABOUT TOTAL WEIGHTS – Make sure that the Pipe or Conduit that you are attaching these Mounting Bars to – HAVETHE ABILITY TO HOLD THAT MUCH WEIGHT. If you are attaching to thin wall pipe or conduit, they cannot carry that much weight.  Use common sense when deciding how much weight your pipe or conduit can safely hold.  These Clamps can hold much more weight than any thin wall pipe or conduit can sustain.

Choose between White or Black Rubber End Covers.