SteadyMax Camera Poles

 

SteadyMax Camera Poles

The newest Generation of ultra-steady camera poles from Strong Poles, are the SteadyMax Series of round and tapered camera poles. These poles are engineered to withstand 150mph winds with a full load of cameras, cabinets and sensors – yet are limited to 3% of movement under those conditions.

These engineered camera poles also have a Factory-Installed Vibration Suppression System  (Read More)  that consists of two different frequency dampeners that quell high and low frequency vibrations and oscillations that may occur during the life of the pole.

The result is the Steadiest, most rigid pole we have ever built, yet is very lightweight (our 16′ pole weighs only 65 lbs.). This is an amazing Engineering feat to make a pole this steady, yet this lightweight.

It comes with our exclusive 20 Year Warranty, and includes the anchor bolts and anchor template.

• The 20′ SteadyMax Camera Pole is a round tapered pole, and is approximately 8” O.D. at the bottom, and tapers down to 6” O.D. At the top of the pole where the attachment plate is. This pole is heavy wall (.156 thick) construction, using 6063-T6 Aluminum and can be ordered in our usual White or Black (Dark Bronze) Powder Coat finishes. The standard Hand Hole is 18″ from the base, and if you want an extra Hand Hole it is 4′ from the top of the pole.

• The 25′ SteadyMax Camera Pole is tapered from approximately 8” O.D. At the bottom, to 6” O.D. At the top of the pole where the attachment plate is. This pole is a Ultra Heavy Wall (.250 thick – 1/4”) aluminum tapered round pole using 6063-T6 Aluminum, and can be ordered in our usual White or Black (Dark Bronze) Powder Coat finishes. The standard Hand Hole is 18″ from the base, and if you want an extra Hand Hole it is 5′ from the top of the pole.